Another top seller from SmartSpeed66,
Direct replacement for the original troublesome Factory Indicator Relay.
Fixes: No Indicators, only one side working, flashing too fast, indicator just staying on. Such a common issue, we recommend you carry one as a spare too.
This is a direct plug and play item, Relay is under the Headset, easy to replace
Now with Indicator on Buzzer, Perfect for safe riding with out leaving an indicator on.
Please Note
For use with standard RA indicators
Suitable for some of our Indicator Conversion Kits
Message us if unsure
Free Post and packing to the UK
Royal Alloy Indicator Relay with Buzzer
SmartSpeed66 Flasher relay
The Flasher relay is located in the headset behind the headlight, first remove the two screws underneath the head set ( usually Phillips screw) then remove the two screws either side of the headlight trim.
This will alloy you to remove the top cover. Be careful as there maybe wires attached, you do not need to disconnect anything.
The relay can be seen at this point and is an easy straight swap plug and play
To reduce the volume of the unit place a bit of tape over the speaker hole. This is found under the relay, then pierce with a pin
Re-assemble is the reverse of the above